PRESSURE-SENSITIVE AND WRAPAROUND

Labels

Label inks for paper and film facestocks, chosen for crisp detail, adhesion and the resistance each product demands.

OVERVIEW

Ink for the whole pack

A label is often the first thing a customer reads. It has to reproduce fine type and brand color precisely, stay adhered through squeezing, chilling or washing, and resist the product it identifies. Ink choice follows the facestock, the press and how the labeled product is used.

Label selection begins with the surface receiving the print. A paper label, a coated film facestock and a squeeze-bottle label can show the same artwork differently and face different conditions in use. Identify the exact facestock and topcoat, then describe the press and its drying or curing method. Include fine text and large color areas in the discussion so both information and brand appearance are considered.

The label also needs a clear end-use brief. Condensation on a chilled bottle, repeated squeezing and contact with oils or detergents present different challenges to the printed surface. Describe the conditions the image will meet and any protective finish above it. Keep print performance and the label adhesive requirements explicit, so an ink discussion is not mistaken for approval of the complete label construction.

For water-based flexographic labels, record the anilox specification together with viscosity and, where relevant to the formulation, pH during a trial. Ink transfer influences both solid color and fine detail, while drift in operating conditions can change the result over a run. Compare samples from the beginning and later stages against the agreed artwork targets.

Printed packaging labels on rolls

WHAT MATTERS

Key considerations

The material, printed layer and finishing sequence all influence the ink recommendation. Use these application considerations to prepare a brief for your packaging structure.

Facestock and topcoat

Paper, PP and PE facestocks, with or without a print-receptive topcoat, each change adhesion and color appearance.

Fine type and detail

Ingredients lists and regulatory text need clean, legible reproduction at small sizes and high line speeds.

Product resistance

Oils, alcohol, detergents or condensation can attack a print. Name the product the label will meet.

RECOMMENDED PRODUCTS

Inks for this application

View All Products

APPLICATION QUESTIONS

Frequently asked questions

Practical answers to help you prepare the material, process and finished-pack details for this application.

More guidance
Why does a label facestock topcoat matter to ink selection?

The topcoat is part of the surface receiving the ink and can affect adhesion and the appearance of the printed color. Provide the exact facestock reference and say whether a print-receptive coating is present. Include your process and drying or curing method. Referring only to paper, PP or PE leaves important details unresolved, particularly when replacing one label material with another that looks similar.

What information helps assess labels for chilled beverage bottles?

Describe the facestock, any topcoat and the condensation or wet handling expected after labeling. Explain whether the printed surface has a protective finish and identify the press setup. The enquiry should distinguish the resistance needed from the image from the adhesion needed between label and bottle. Assess the proposed printed construction under the intended handling conditions rather than treating a beverage label as a single standard specification.

How should small text be considered when choosing a label ink?

Include representative artwork showing ingredients, instructions and other small text, together with the facestock and printing process. Clean reproduction depends on the printing conditions as well as the ink, so review legibility using the intended production setup. Agree how the printed result will be accepted, including after relevant handling. A strong solid color sample does not demonstrate that fine text in the same design will reproduce clearly.

What should be specified for labels on squeezable containers?

Identify the label material and describe how the container is squeezed and handled during use. Include the contents and any likely contact with the printed surface, such as oils, creams or cleaning products. These requirements should be considered alongside the press and finish. Evaluate the image on the intended label construction; the flexibility of a container alone does not identify an appropriate ink or establish the performance of its adhesive.

Can a wraparound label follow a pressure-sensitive label specification?

Review the construction and process before carrying a specification across. Wraparound and pressure-sensitive labels can use different materials, print surfaces and finishing routes, even when they carry the same brand design. Provide both material references, the intended press and the conditions in use. Color appearance and resistance should be assessed for the proposed construction rather than inferred from a previously approved label in another format.

How should exposure to the labeled product be described?

Name the contents and explain whether spills, wiping or repeated contact are likely to reach the print. Oils, alcohol and detergents create different requirements, so a general request for a durable label is not precise enough. Include the facestock and protective finish, if used, and agree the relevant acceptance criteria. Confirm suitability for the particular product and conditions instead of assuming a label ink resists every household or personal-care formulation.

Talk to us about labels

Tell us about your press, substrate and color target. We will help you frame the right ink conversation.