RESOURCES

Technical Resources

Practical guidance for choosing a packaging ink and preparing an enquiry that gets a useful answer the first time.

PRINTING KNOWLEDGE

Water-based inks, from chemistry to production

Explore how ink chemistry and press conditions work together, from water-based formulation and substrate wetting to drying, print defects and storage. Use this guidance to frame an enquiry or plan an evaluation, then follow the technical and safety instructions for the specific product. General guidance does not establish product suitability or regulatory approval.

Read All 40 FAQs

Understanding water-based inks

Start with the carrier system and what it means for the printing job.

Explore this topic

Formulation and press control

Review color, transfer and drying as connected parts of the system.

Explore this topic

Troubleshooting print quality

Describe the symptom and operating conditions before selecting a corrective action.

Explore this topic

Sustainability, storage and cleaning

Separate product information from assumptions about the whole lifecycle.

Explore this topic

Jazeera Inks enquiries

Bring the application, target and evidence into the same conversation.

Explore this topic

INK SELECTION GUIDE

Five questions before choosing an ink

Answer these in order. Each narrows the choice, and together they make a complete brief.

  1. Printing process

    Offset, flexographic and gravure presses transfer ink differently. The process narrows the choice before anything else.

    Browse inks by process
  2. Substrate

    Film, paper, board and label stocks each need their own chemistry. Note the grade, coating and surface treatment.

    See packaging applications
  3. Finishing and end use

    Lamination, varnish, sealing, filling and the product inside the pack decide the resistance the ink needs.

    Explore industries
  4. Color target

    Bring a physical reference and the viewing conditions. A screen image explains intent but is not a color standard.

    Custom color matching
  5. Documentation and volume

    List the technical, safety and compliance documents you need, with quantity, timing and delivery location.

    Request documents

FAQS

Frequently asked questions

What is the difference between a printing process and an ink system?

Offset, flexography and gravure are printing processes: how the ink reaches the substrate. Water-based, solvent-based and UV-curable describe ink systems: what carries the color and how it dries or cures. An enquiry needs both.

Which details make an ink enquiry useful?

The printing process and press, the exact substrate, finishing steps, the product the pack contains, a color reference, the quantity and the delivery location. For an existing job, include the current product reference and any changes to the material or press. For a problem, explain when the symptom first becomes visible.

Can I switch from one ink system to another?

Often, but it is a production change. Drying, cleaning, press settings and end-use performance all need review, and the new system should be trialled on your press first. Include the reason for the change and the conditions the finished pack must meet, then confirm the evaluation plan and the scope of supporting documentation.

Do you provide technical and safety data sheets?

Technical and safety documentation is issued for the specific product recommended for your job. Ask for it in your enquiry. Include the proposed product reference, application and market, and confirm which documents are available and what they cover before making a product approval.

Are your inks suitable for food packaging?

Suitability depends on the specific product, the packaging structure and the regulations in your market. State the end use at the start so the right product and documentation can be discussed.

Is a photograph enough for a color match?

It helps explain the intent, but lighting, cameras and screens change how color looks. Send a physical sample or an agreed color reference when a close match matters. State the actual substrate and intended coating or laminate, and agree the physical reference and viewing conditions to use when reviewing the finished print.

How should I choose between the product, solution and industry pages?

Start with Products if you know the printing process or ink system. Use Solutions when the packaging format is your starting point, or Industries when the end use defines the main questions. These routes describe the same decision from different angles. Include the material, finishing sequence and product inside the pack when you contact the team.

What should I check before repeating an approved packaging job?

Identify the existing product reference and approved sample, then compare the substrate, press setup, finish and intended use with the previous job. Include any changed material grade, supplier specification or conversion step. A repeat artwork file does not establish that the complete production brief is unchanged, so highlight the differences before carrying an approval forward.

Should an ink trial be assessed before or after finishing?

The printed result should be considered at the stages relevant to the finished packaging. A shade can look different after coating or lamination, and conversion can reveal handling or compatibility questions that a flat print does not show. Agree the evaluation criteria and responsibility for approval before the trial, using the proposed product and actual materials.

Can I use a general category description as a product specification?

A category page helps you prepare a brief; it does not replace the technical information for an individual product. Confirm the proposed product reference, recommended application and available documents before approval. If a customer has a specific resistance, safety or compliance requirement, include it in the enquiry so the scope of supporting information can be discussed.

What is the difference between a technical and a safety data sheet?

A technical data sheet explains the intended application and product guidance, while a safety data sheet addresses hazards, handling and storage. A compliance statement answers a further, specific question about the product and stated use. Request the documents needed by your team and check that their references match the proposed product rather than assuming one document covers every purpose.

How does the website enquiry process work?

The form prepares an enquiry summary in your browser. You can copy the details or open a draft in your email application, review it and send it yourself. Preparing the summary does not send a message. Add the printing process, exact substrate, intended use and any supporting references so the email includes the context needed for a useful discussion.

TECHNICAL DOCUMENTS

Documentation on request

Documents are issued for the specific product recommended for your job, so they always match what you will actually run.

Request Documents

Technical data sheets

Recommended use, substrates, press guidance and handling for the specific product proposed for your job.

Safety data sheets

Hazard, storage and handling information supplied with each product recommendation.

Compliance statements

Statements for regulated end uses are provided where they exist for the specific product. Ask before you select.

BEFORE YOU GET IN TOUCH

Prepare a brief your technical team can use

A few concrete details help connect your question to the right product, application and supporting documents.

Have a technical question?

Describe your press, substrate and the problem you are solving. We will point you to the right product and documents.